液压PCV比例阀 油缸马达检测实验设备

• Hydraulic motor test bench, hydraulic cylinder test bench

Note: if forced oil supply is required, the suction port of the pump is connected to the closed

high-pressure port a or B. start the low-pressure oil supply motor, adjust the low-pressure oil

supply pressure control knob, and adjust the oil supply pressure to 1.5~2 MPa;;

2、 Test operation: (forced oil supply, low pressure oil supply)

1.

1.

Start the low-voltage oil supply motor

2.

2.

Adjust the low-pressure oil supply pressure control knob to adjust the oil

supply pressure to 1.5~2 MPa;

3. Start the main motor

4. Adjust the speed regulation knob to make the speed reach 800~1800 rpm;

Observe the driving tachometer, flow meter and loading pressure gauge at any

time

5. Adjust the loading pressure control knob to load,

a)

a) Precautions during loading:

Keep the rotating speed constant during pressurization

• Hydraulic motor test bench, hydraulic cylinder test bench

Note: if forced oil supply is required, the suction port of the pump is connected to the closed

high-pressure port a or B. start the low-pressure oil supply motor, adjust the low-pressure oil

supply pressure control knob, and adjust the oil supply pressure to 1.5~2 MPa;;

2、 Test operation: (forced oil supply, low pressure oil supply)

1.

1.

Start the low-voltage oil supply motor

2.

2.

Adjust the low-pressure oil supply pressure control knob to adjust the oil

supply pressure to 1.5~2 MPa;

3. Start the main motor

4. Adjust the speed regulation knob to make the speed reach 800~1800 rpm;

Observe the driving tachometer, flow meter and loading pressure gauge at any

time

5. Adjust the loading pressure control knob to load,

a)

a) Precautions during loading:

Keep the rotating speed constant during pressurization